Tools Required

J 43631 Ball Joint Remover

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the brake rotor. Refer to Front Brake Rotor Replacement .



4. Using J 43631 press the stud from the wheel bearing/hub.

1. Install a new stud. Use washers and a wheel nut and pull the new stud into the hub.
2. Install the brake rotor. Refer to Front Brake Rotor Replacement .
3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
4. Lower the vehicle.