Important: The following steps must be completed before
using the symptom tables.
- Perform the
Diagnostic System Check - Vehicle
in Vehicle DTC Information before using the Symptom Tables in order to
verify that all of the following are true:
| • | The control module(s) can communicate via the serial data
link. |
- Review the theft systems description and operation in order to familiarize
yourself with the system functions. Refer to the following:
Visual/Physical Inspection
| • | Inspect the easily accessible or visible system components for obvious
damage or conditions which could cause the symptom. |
| • | Inspect the ignition key for PK3 stamped on the shank. |
| • | Inspect the PASS-Key III® key head for damage. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions.
Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to
diagnose the symptom:
