GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2004 🢒 Rainier 🢒 Engine 🢒 Engine Controls - 4.2L 🢒 Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 746673 Size: SH
  2. Remove the transfer case left rear speed sensor electrical connector.
  3. Remove the transfer case left rear speed sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 746673 Size: SH
  1. Install the transfer case left rear speed sensor.

    2. Tighten
    Tighten the sensor to 17 N·m (13 lb ft).

  2. Install the transfer case left rear speed sensor electrical connector.
  3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .