GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Rainier 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 744320 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the stabilizer shaft link to stabilizer shaft retaining nut.

    3. Object Number: 731562 Size: SH
  3. Remove the stabilizer shaft link to lower control arm retaining nut.

    4. Notice: Do not pry on the stabilizer shaft link. Use care when removing or installing the stabilizer shaft link in order to avoid tearing or puncturing the stabilizer shaft link boot. Damage to the stabilizer shaft link boot will lead to damage to the stabilizer shaft link.

  4. Remove the stabilizer shaft link.

Installation Procedure

    Object Number: 731562 Size: SH
  1. Install the stabilizer shaft link to the lower control arm.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft link to lower control arm retaining nut.

    3. Tighten
    Tighten the nuts to 155 N·m (114 lb ft).


    Object Number: 744320 Size: SH
  3. Install the stabilizer shaft link to the stabilizer shaft.
  4. Install the stabilizer shaft link to stabilizer shaft retaining nut.

    5. Tighten
    Tighten the nuts to 155 N·m (114 lb ft).

  5. Lower the vehicle.