Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
The antenna signal circuit is a coaxial cable that carries the radio signal information received by the antenna. The antenna cable also provides a path for DC current for powering the antenna.
Entertainment Connector End Views
Radio/Audio System Description and Operation
EL-48028 Digital Radio Test Antenna
Make sure the vehicle is outside in an area with an unobstructed view of the southern sky. Turn ON XM radio. Tune the radio to satellite channel 1. If the reception is not clear , contact XM at 1-800-852-9696 to verify customer account status or possible network problems.
⇒ | If the reception is not improved, replace the DRR. |
⇒ | If the resistance is greater than 5 ohms, replace the antenna coaxial cable. |
⇒ | If the resistance is greater than 5 ohms , replace the antenna coaxial cable. |
⇒ | If there is less than infinite resistance between the inner conductor and the outer conductor of the coaxial cable, replace the antenna coaxial cable. If the coaxial cable tests normal, replace the digital radio antenna. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
• | Control Module References for DRR replacement, setup and programming |