POWER STEERING SHUDDER REPLACE INLET HOSE & PIPE ASSY

SUBJECT: POWER STEERING SHUDDER (INLET HOSE AND PIPE ASSEMBLY REPLACEMENT)

MODELS AFFECTED: 1988-89 REGALS WITH 2.8L ENGINE (VIN CODE W) 1989-91 REGALS WITH 3.1L ENGINE (VIN CODE T)

CONDITION:

---------- Some 1988-91 Regals with 2.8L (VIN Code W) or 3.1L (VIN Code T) V-6 engines assembled prior to VIN M1829387 may exhibit a slight power steering shudder condition noted during static or low speed turning maneuvers. This condition may be perceived as a disturbance felt and heard by the vehicle operator through the body structure and steering wheel.

CAUSE:

------- A combination of power steering pump pressure pulses and engine firing frequency generating a disturbance transmitted through the body structure.

CORRECTION:

------------- Replace the existing power steering inlet (pressure) hose and pipe assembly with new assembly noted below by model year, with internal tuning cable and high expansion hose material.

1988-90 1991 ------------ ------------ P/N 26025653 P/N 26026921

Parts are currently available from GMSPO.

WARRANTY INFORMATION:

Labor Operation Number: E8622 Labor Time: .8 hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.