SERVICE GUILD: CATALYTIC CONVERTER HEAT SHIELD

CATALYTIC CONVERTER WITH SHIELD ATTACHMENT

MODELS AFFECTED: 1988 REGALS ---------------- Many dealers and zones have commented that the heat shield attachment for the catalytic converter is "missing two nuts". Please note that, by design, only two of the four studs used to attach the shield require nuts. The additional two studs (one each side) are used when reprocessing is required in the plant. Refer to Illustration.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.