INSTRUMENT PANEL PAD LOOSE FROM BASE CARRIER ASSEMBLY

MODELS AFFECTED: 1988 AND 1989 BUICK REGAL

Regluing loose instrument panel pads to the base may be accomplished with the use of Loctite(R) Super Bonder

1. Remove instrument panel pad and place on clean work surface.

2. Carefully remove vinyl backing from foam pad at loose area.

3. Apply Loctite (R) Super Bonder to pad following manufacturers instructions.

"We believe this source and their product to be reliable. There may be additional manufacturers of such products. General Motors does not endorse, indicate any preference for or assume any responsibility for the products from this firm or for any such items which may be available from other sources."

WARRANTY INFORMATION

Labor Operation Number: C2500 Labor Time: .4 Hour Remove and Replace Pad .2 Hour Reglue .6 Hour Trouble Code: 92

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.