UPDATE-ELECTRIC MOTOR REPLACE OUTSIDE REAR VIEW MIRROR

MODELS AFFECTED: 1988-90 REGALS EQUIPPED WITH DG7 ELECTRIC REARVIEW MIRROR

ELECTRIC MIRROR MOTOR PROCEDURE

REMOVE OR DISCONNECT

1. Mirror and filler, Refer to "Electric Mirrors" - DOORS (Section 10-5) in specific Service Manual.

CAUTION:

To minimize the chance of personal injury, gloves and safety glasses should be worn.

2. Glass from mirror housing.

*Pull up and out carefully with fingers.

*Disengage plastic clips.

3. Motor retaining screws and motor.

INSTALL OR CONNECT

1. Motor and motor retaining screws.

2. Glass to mirror housing.

* Engage plastic clips.

3. Filler and mirror. Refer to "Electric Mirror" - DOORS (Section 10-5) in specific Service Manual.

Please update your service manuals accordingly.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.