WINDSHIELD WASHER FLUID APPLICATION

WINDSHIELD MASHER PERFORMANCE ENHANCEMENTS

MODELS AFFECTED: 1988 REGALS ---------------- Some customer comments have been received on early production 1988 Regals concerning performance of the washer system. The following changes can be made to enhance the washer system performance:

1. The washer pump wiring connector indexing can be revised, as shown in the diagram, on Regals prior to VIN J1470583 to increase the rate of washer fluid applied to the windshield.

The procedure which must be followed for removing the Metri-pack 150 series terminals used on this connection is shown at the beginning of Section 8A in the 1988 Regal Service Manual.

WARRANTY INFORMATION

Labor Operation Number: T1357 Labor Time: 0.2 Hours Trouble Code: 92

2. A revised washer program module is available which allows 1 1/2 wipes of continuous washer operation. This replaces the program which provided wash on outwipes only with a dry return wipe. Vehicles before VIN J1488572 can be revised by removing the existing wiper cover assembly and replacing with cover assembly service package 22063284 for a base system and 22087513 for a pulse system.

Parts are currently available from GMSPO.

WARRANTY INFORMATION

Labor Operation Number: N3580 Labor Time: 1.4 Hours Trouble Code: 92

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.