DOOR TRIM SWITCH PLATE EXHIBITS GAP AT ARM REST

DOOR TRIM SWITCH PLATE GAPS TO ARM REST

VEHICLES AFFECTED: 1988 BUICK REGAL ------------------

Comments may be received that some 1988 Buick Regals may have a gap between the door trim switch plate and the arm rest.

To reduce the gap space a clip may be added to the upper edge of the plate assembly as Illustrated. Clips are available through GMSPO P/N 20619151. Clip can be attached to the plate assembly using double sided tape. Position clip on plate assembly as Illustrated.

Use the most applicable labour operation from the Canadian Labour Time Guide.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.