WHEEL MAXIMUM LATERAL RUNOUT SPECIFICATIONS

1988-90 W-CARS

The steel wheel maximum lateral runout specification is:

1.142mm (0.045 in.)

for the followig Service Manuals

Division Model Year Pages -------- ---------- ------ Buick 1988 3E-3 Buick 1989 3E-5 and 3E-10

Oldsmobile 1988 3E-3 Oldsmobile 1989 3E-5 and 3E-10

Pontiac 1988 3E-3 Pontiac 1989 3E-5 and 3E-10

Chevrolet 1990 3E-5 and 3E-10

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.