SER. MAN. UPDATE SEC.6A STRUT TO ENGINE BRKT. BOLT TORQUE

SUBJECT: SERVICE MANUAL UPDATE - SECTION 6A 3.IL V6 CODE T (LHO)

MODELS AFFECTED: 1990-91 REGAL WITH 3.IL V6 ENGINE (VIN CODE T)

SERVICE MANUAL UPDATE - Section 6A

The strut-to-engine bracket bolt torque specification for the 3.1L V6 VIN Code T (LHO) shown under "Rotating Engine" was listed as 70 N.m (51 lbs. ft.). The correct specification is 43 N.m (32 lbs. ft.).

1990 Regal - Page 6A5-2

1991 Regal - Page 6A5-14 Page 6A5-59

Please note this information in your copies of the above Service Manuals.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.