WIRE WHEEL COVER LOOSE/RATTLES NEW BRKT. DESIGN RELEASED

SUBJECT: WIRE WHEEL COVER APPEARS LOOSE AND RATTLES AGAINST WHEEL RIM (REPLACE BRACKETS WITH NEW ONES)

MODELS AFFECTED: 1990-91 REGALS WITH WIRE WHEEL COVERS (OPTION N91)

CONDITION:

------------ Wire wheel cover may appear to be loose and rattle against wheel rim.

CAUSE:

------------ Some mounting brackets may be too long and not allow the wire wheel cover to be drawn up snug against the wheel rim.

CORRECTION:

------------ Brackets have been installed in production that are 5 mm shorter. If a vehicle built prior to VIN M184435'7 is found with this condition, replace the four existing brackets with four new brackets P/N 10200016.

Parts are currently available from GMSPO.

WARRANTY INFORMATION:

Labor Operation Number: T1717 Labor Time: .4 Hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.