WIRE WHEEL COVER LOOSE/RATTLES NEW BRKT. DESIGN RELEASED

SUBJECT: WIRE WHEEL COVER APPEARS LOOSE AND RATTLES AGAINST WHEEL RIM (REPLACE BRACKETS WITH NEW ONES)

VEHICLES AFFECTED: 1990-91 BUICK 'W' W/RPO N91

Condition:

----------- Wire wheel cover may appear to be loose and rattle against wheel rim.

Cause:

------ Some mounting brackets may be too long and not allow the wire wheel cover to be drawn up snug against the wheel rim.

Correction:

----------- As of VIN M1844357, brackets have been installed in Production that are 5 mm shorter. If a vehicle is found with this condition, replace the four existing brackets with four new brackets P/N 10200016.

Use the most applicable Labour Operation and Time from the Canadian Labour Time Guide.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.