REVISION: 03/01/94
TRANSAXLE APPLICATIONS: HYDRA-MATIC 4T60-E (RPO M13)
SOME OWNERS MAY EXPERIENCE A HARSH 1-2, 2-3 OR 3-4 UPSHIFT CONDITION. THE HARSH UPSHIFT CONDITION WILL USUALLY BE NOTICEABLE DURING A LIGHT TO MEDIUM THROTTLE UPSHIFT.
CAUSE: (FIGURES 1, 2 AND 3) THE HARSH UPSHIFT CONDITION MAY BE CAUSED BY:
O A MISSING OR LOOSE ACCUMULATOR BUSHING RETAINER.
O A METAL SHAVING (BURR) OR DEBRIS IN THE ACCUMULATOR VALVE TRAIN IN THE CONTROL VALVE BODY.
CORRECTION: (FIGURES 2 AND 3) TO REPAIR THIS CONDITION, INSPECT THE CONTROL VALVE BODY FOR THE FOLLOWING:
O ACCUMULATOR BUSHING RETAINERS FOR BEING PRESENT AND SECURELY INSTALLED. IF A RETAINER IS MISSING, REFER TO SERVICE PART INFORMATION FOR RETAINER PART NUMBERS.
O ACCUMULATOR VALVE TRAIN IN THE CONTROL VALVE BODY FOR BINDING DUE TO BURRS OR DEBRIS. DISASSEMBLE AND CLEAN THE CONTROL VALVE BODY IF BURRS OR DEBRIS ARE FOUND.
SERVICE PART INFORMATION: (FIGURE 4) THE ACCUMULATOR BUSHING RETAINER DESIGN WAS CHANGED AFTER THE START OF THE 1993 MODEL YEAR. PREVIOUS AND CURRENT DESIGN ACCUMULATOR BUSHINGS AND RETAINERS ARE NOT INTERCHANGEABLE. TO DETERMINE THE CORRECT ACCUMULATOR RETAINER BUSHING TO ORDER FOR 1993 MODEL TRANSAXLES, INSPECT ONE OF THE OTHER ACCUMULATOR BUSHING RETAINERS THAT IS PRESENT IN THE CONTROL VALVE BODY. COMPARE WITH FIGURE 2 TO DETERMINE THE CORRECT PART NUMBER TO ORDER.
+-----------------------------------------------------------+ | PART NUMBER | DESCRIPTION | MODELS | |-------------+--------------------------------+------------| | | | ALL 1991 | | 8651493 | RETAINER, ACCUMULATOR BUSHING | ALL 1992 | | | (3/PACKAGE) | EARLY 1993 | |-------------+--------------------------------+------------| | 8681510 | RETAINER, ACCUMULATOR BUSHING | LATE 1993 | | | (3/PACKAGE) | ALL 1994 | +-----------------------------------------------------------+
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE:
LABOR OPERATION: K6570 LABOR TIME: USE PUBLISHED LABOR OPERATION TIME.
+-----------------------------------------------------+ | LEGEND FOR FIGURES 2, 3 AND 4 | |-----------------------------------------------------| | ITEM | COMPONENT DESCRIPTION | |------+----------------------------------------------| | 3 | CASE, TRANSAXLE | | 103 | BOLT, 2-1 SERVO COVER TO CASE | | 104 | COVER, 2-1 MANUAL SERVO BODY | | 105 | SEAL, SQUARE CUT (2-1 SERVO) | | 106 | CLIP, RETAINING (BOTTOM) | | 107 | SEAL, LIP | | 108 | PISTON, 2-1 MANUAL SERVO | | 109 | SPRING, 2-1 MANUAL SERVO CUSHION | | 110 | RETAINER, INT. SERVO SPRING MANUAL CUSHION | | 111 | PIN, 2-1 MANUAL APPLY | | 112 | SPRING, 2-1 MANUAL SERVO RETURN | | 113 | SEAL, O-RING | | 114 | BODY, 2-1 MANUAL SERVO | | 115 | FILTER, 2-1 SERVO | | 124 | PIPE, FORWARD SERVO APPLY | | 125 | PIPE, MANUAL SERVO APPLY | | 126 | PIPE, LUBE OIL | | 127 | CLAMP, HOSE | | 128 | HOSE, LUBE OIL | | 129 | RETAINER, LUBE PIPE CLIP | | 130 | PIPE AND WASHER ASSEMBLY | | 131 | BOLT, ACC. COVER TO CASE AND ACC. HOUSING | | 132 | COVER, ACCUMULATOR | | 133 | GASKET, ACCUMULATOR COVER | | 134 | PLATE, ACCUMULATOR SPACER | | 135 | PIN, 2-3 ACCUMULATOR | | 136 | PISTON, 1-2 AND 2-3 ACCUMULATOR | | 137 | RING, OIL SEAL ACCUMULATOR PISTON | | 138A | SPRING, 2-3 ACCUMULATOR (INNER) | | 138B | SPRING, 2-3 ACCUMULATOR (OUTER) | | 139B | SPRING, 1-2 ACCUMULATOR (INNER) | | 139C | SPRING, 1-2 ACCUMULATOR (OUTER) | | 140 | HOUSING, ACCUMULATOR | | 301 | BODY, CONTROL VALVE | | 338 | RETAINER, 1-2 ACCUMULATOR PLUG | | 339 | PLUG, 1-2 ACCUMULATOR | | 340 | SPRING, 1-2 ACCUMULATOR VALVE (PRIMARY) | | 341 | VALVE, 1-2 ACCUMULATOR (PRIMARY) | | 342 | BUSHING, 1-2 ACCUMULATOR VALVE (PRIMARY) | | 343 | VALVE, 2-3 ACCUMULATOR | | 344 | SPRING, 2-3 ACCUMULATOR VALVE | | 345 | BUSHING, 2-3 ACCUMULATOR VALVE | | 346 | PLUG, 1-2 ACCUMULATOR (SECONDARY) | | 347 | VALVE, 1-2 ACCUMULATOR (SECONDARY) | | 348 | SPRING, 1-2 ACCUMULATOR VALVE (SECONDARY) | | 349 | BUSHING, 1-2 ACCUMULATOR VALVE (SECONDARY) | | 350 | VALVE, 3-4 ACCUMULATOR | | 351 | SPRING, 3-4 ACCUMULATOR VALVE | | 352 | BUSHING, 3-4 ACCUMULATOR VALVE | | 385 | RETAINER, ACCUMULATOR VALVE BUSHING ASSEMBLY | +-----------------------------------------------------+
FIGURES: 4
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1994. GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.