REVISION: 01/04/95
BULLETIN BEING REVISED TO CHANGE "CORRECTION" STATEMENT. PLEASE DISCARD BULLETIN 435012 (GROUP REFERENCE 5 - BRAKES). ----------------------------------------------------------------------
THE CUSTOMER MAY COMMENT THAT THE ABS WARNING LIGHT IS ON. DIAGNOSTIC TROUBLE CODE (DTC) 22 OR 33 MAY BE SET FOR THE ABS.
OCCASIONALLY, THE ABS WIRE HARNESS FOR THE RIGHT FRONT WHEEL MAY RUB ON THE BRAKE LINE IN THE AREA SHOWN IN THE ILLUSTRATION. TO PREVENT THIS FROM HAPPENING IN THE FUTURE, A PLASTIC SHIELD WAS ADDED IN PRODUCTION NEAR THE END OF THE 1994 MODEL YEAR.
IF THE WIRING IS DAMAGED, IT MUST BE REPLACED. **DO NOT** ATTEMPT TO REPAIR THESE WIRES. ADD SHIELD, P/N 10269730, AS SHOWN IN THE ILLUSTRATION. SECURE WITH PLASTIC RETAINER, P/N 20664092. PUSH THE RETAINER FULLY INTO THE SHIELD, AND HOLD FIRMLY IN PLACE, THEN TAP THE END OF THE RETAINER TO FULLY SEAT THE PLUNGER.
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: N6035 USE PUBLISHED LABOR OPERATION TIME. ADD: 0.1 HR. FOR INSTALLATION OF THE SHIELD
FIGURES: 1
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1994 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.