GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1997 🢒 Regal 🢒 Engine 🢒 Engine Mechanical - 3.1L and 3.4L 🢒 Engine Front Cover Installation

    Object Number: 54375 Size: SH
  1. Install the front cover gasket.
  2. Apply sealer to both sides of the lower tabs of the front cover gasket.

    3. Use GM RTV sealer GM P/N 12346004 or its equivalent.

  3. Install the front cover.
  4. Install the front cover bolts.

    5. Tighten

        • Tighten the large bolts (2) to 47 N·m (35 lb ft).
        • Tighten the small bolts (1) to 21 N·m (15 lb ft).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 54356 Size: SH
  5. Install the drive belt tensioner.
  6. Install the drive belt tensioner retaining bolt.

    7. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).