Removal Procedure
- Remove the oil pan. Refer to
Oil Pan Replacement
.
- Remove the filter. Remove the lip ring
seal pressed into the case only if replacement is necessary.
- Inspect the screen for the following foreign material:
• | Inspect for metal particles. |
• | Inspect for clutch facing material. |
• | Inspect for rubber particles. |
• | Inspect for engine coolant. |
- Determine the source of the contamination if foreign material
is evident.
- Correct the source of the contamination.
- Use solvent to clean the screen.
- Blow-dry the screen.
Installation Procedure
- Install the seal. Install a new lip ring
seal into the case if the seal was previously removed.
- Install a new filter if required.
- Install the oil pan. Refer to
Oil Pan Replacement
.