Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the instrument cluster diagnostic system check? | -- | Go to Step 2 | |
2 | Inspect the engine oil level. Is the engine oil level at the FULL mark on the dipstick? | -- | Go to Step 4 | Go to Step 3 |
3 |
Does the low oil indicator illuminate for approximately 3 seconds and turn off? | -- | Go to Step 4 | |
4 | Test for powertrain control module (PCM) DTCs. Refer to Powertrain On Board Diagnostic (OBD) System Check (RPO 3.1L) or Powertrain On Board Diagnostic (OBD) System Check (RPO 3.8L) in Engine Controls Is the action complete? | -- | Go to Step 5 | -- |
5 |
Does the low oil indicator turn off? | -- | Go to Powertrain On Board Diagnostic (OBD) System Check (RPO 3.1L) or Powertrain On Board Diagnostic (OBD) System Check (RPO 3.8L) in Engine Controls | Go to Step 6 |
6 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | -- |
