Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the instrument cluster diagnostic system check? | -- | Go to Step 2 | |
2 | Connect a scan tool and test for powertrain control module (PCM) DTCs. Refer to Powertrain On Board Diagnostic (OBD) System Check (RPO 3.1L) or Powertrain On Board Diagnostic (OBD) System Check (RPO 3.8L) in Engine Controls Is the action complete? | -- | Go to Step 3 | -- |
3 |
Does the change oil indicator flash twice and then turn off? | -- | Go to Step 4 | Go to Step 6 |
4 | Turn the ignition switch to the RUN position. Does the change oil indicator illuminate for approximately 60 seconds and then turn off? | -- | Go to Powertrain On Board Diagnostic (OBD) System Check (RPO 3.1L) or Powertrain On Board Diagnostic (OBD) System Check (RPO 3.8L) in Engine Controls | Go to Step 5 |
5 |
Does the change oil indicator turn off? | -- | Go to Step 6 | |
6 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | -- |
