Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the Automatic Door Locks System Check performed?
| --
| Go to
Step 2
| Go to
Power Door Locks System Check
|
2
|
- Turn the ignition switch to the LOCK position.
- Disconnect the electrical connector of the inoperative door lock
switch.
- Connect a test light between B+ and the inoperative door lock
switch harness connector terminal F.
Does the test light illuminate?
| --
| Go to
Step 3
| Go to
Step 4
|
3
|
- Inspect for a poor connection at the inoperative door lock switch.
- If the connection is OK, replace the inoperative door lock switch.
Has the repair been made?
| --
| Go to
Step 5
| --
|
4
| Repair a poor connection or an open in CKT 750.
Has the repair been made?
| --
| Go to
Step 5
| --
|
5
|
- Turn the ignition switch to the LOCK position.
- Reconnect the connectors.
- Reinstall the components.
Have all the repairs been made?
| --
| Go to
Power Door Locks System Check
| --
|
