Removal Procedure
- Remove the oil pan (24)
and the gasket (25). Refer to
Oil Pan Replacement
.
- Remove the filter (100).
Remove the lip ring seal (101) pressed into the case only if replacement is
necessary.
- Inspect the screen for the following foreign material:
• | Inspect for metal particles. |
• | Inspect for clutch facing material. |
• | Inspect for rubber particles. |
• | Inspect for engine coolant. |
- Determine the source of the contamination if foreign material
is evident.
- Correct the source of the contamination.
- Use solvent to clean the screen.
- Blow-dry the screen.
Installation Procedure
- If removed, install a
new seal (101).
- Install the filter (100),
a new filter if required.
- Install the gasket (25)
and the oil pan (24). Refer to
Oil Pan Replacement
.