Important: If the wrong ignition key is used in an attempt to start the vehicle, a Data Trouble Code (DTC) will be set and the Body Control Module (BCM) will not send a fuel enable or starter enable message to the Powertrain Control Module (PCM) for three minutes even if the correct ignition is used.

The Pass-Key II® Theft Deterrent system prevents vehicle theft by disabling the starter motor and fuel system. If the Body Control Module (BCM) dose not identify the use of the correct ignition key to start the vehicle, the (BCM) will communicate a message to the Powertrain Control Module (PCM) which will disable the crank relay and fuel delivery to the engine.

When the (BCM) identifies the use of the correct ignition key (resistor pellet) to start the vehicle, the (BCM) will send a fuel enable and starter enable message to the (PCM) which will allow the vehicle to start.