GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Regal 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Front Fender Liner Replacement

Removal Procedure

    Object Number: 325832 Size: SH
  1. Remove the bolts from the front fender liner at the front bumper fascia.
  2. Remove the nut from the stud at the rear of the front fender liner.
  3. Remove the bolt from the front tab of the front fender liner at the lower engine compartment side rail.
  4. Remove the bolts from the front fender liner at the rear of the fender.
  5. Remove the front fender liner from the fender.

Installation Procedure

    Object Number: 325832 Size: SH
  1. Install the front fender liner to the wheelhouse opening over the stud.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nut to the stud at the rear of the front fender liner.

    3. Tighten
    Tighten the nut to 4 N·m (35 lb in).

  3. Install the bolts to the front fender liner at the front bumper fascia.

    4. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  4. Install the bolts to the front fender liner at the rear of the fender.

    5. Tighten
    Tighten the bolts to 7 N·m (61 lb in).

  5. Install the bolt from the front tab of the front fender liner at the lower engine compartment side rail.

    6. Tighten
    Tighten the bolts to 4.5 N·m (40 lb in).