1

Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Inspect the engine oil level.

Is the engine oil level at the FULL mark on the dipstick?

--

Go to Step 4

Go to Step 3

1. Fill the engine oil level to the full mark on the dip stick
2. Turn the ignition switch to the RUN position.

Does the low oil indicator illuminate for approximately 3 seconds and turn off?

--

Go to Diagnostic System Check - Instrument Cluster

Go to Step 4

Test for powertrain control module (PCM) DTCs. Refer to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.1L or Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.8L.

Is the action complete?

--

Go to Step 5

--

1. Connect a scan tool to the vehicle data link connector (DLC).
2. Enter the instrument cluster WOW mode.
3. Command the instrument cluster indicators off.

Does the low oil indicator turn off?

--

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.1L or Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.8L

Go to Step 6

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Diagnostic System Check - Instrument Cluster

--