Did you perform the Retained Accessory Power (RAP) System Check?

--

Go to Step 2

Go to Diagnostic System Check - Retained Accessory Power

Verify the fault is present.

Does the system operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Close all of the doors in the vehicle.

Does the door ajar telltale turn off when all the doors are closed?

--

Go to Step 4

Go to Door Ajar Indicator Always On in Doors

1. Replace the body control module. Refer to Body Control Module Replacement in Body Control System.
2. Set up the new body control module. Refer to Body Control Module (BCM) Programming/RPO Configuration in Body Control System.

Did you complete the replacement and the set up procedure?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2