Door Inside Handle Bezel Replacement Front Door

Important: The front inside door handle bezel has an electrical connector for the power door lock system and the radio speaker.

1. Remove the inside door handle bezel screw.



2. Using a small flat-bladed tool, remove the inside door handle bezel from the door trim panel.
3. Remove the inside door lock electrical connector.
4. Remove the inside door handle bezel radio speaker electrical connector.
5. Remove the inside door handle bezel from the vehicle.

1. Connect the door lock electrical connector to the inside door handle bezel.
2. Connect the radio speaker electrical connector to the inside door handle bezel.
3. Press the inside door handle bezel onto the door trim panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the inside door handle bezel screw.

Tighten
Tighten the inside door handle bezel screw to 2 N·m (18 lb in).