GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Regal 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Replacement - Bucket

Removal Procedure

    Important: With the leather seat option, the left, front seat is equipped with a side impact air bag. This must be disabled before any work is done on the seat.

  1. If the seat is equipped with and air bag, refer to SIR Service Precautions for SIR service precautions.

    2. Disable the SIR system. Refer to Disabling the SIR System in Restraints.


    Object Number: 305124 Size: SH
  2. Position the front bucket seat in the full forward to the mid-position and the full up position.
  3. Remove the front bucket seat adjuster track covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
  4. Remove the seat belt from the front seat track.
    5. • For the right front, refer to Seat Belt Retractor Replacement - Right Front in Seat Belts.
    • For the left front, refer to Seat Belt Retractor Replacement - Left Front in Seat Belts.
  5. Remove the front bucket seat adjuster to the floor pan bolts.
  6. Disconnect the front seat electrical connectors.
  7. Disengage the front bucket seat hook attachments from the floor pan.
  8. Remove the front bucket seat from the vehicle.

Installation Procedure

    Object Number: 305124 Size: SH
  1. Position the front bucket seat into the vehicle.
  2. Engage the front bucket seat front hook attachments to the floor pan.
  3. Connect the front bucket seat electrical connectors.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the front bucket seat adjuster-to-floor pan bolts.

    5. Tighten
    Tighten the front bucket seat adjuster-to-floor pan bolts to 42 N·m (31 lb ft).

  5. Install the adjuster track covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
  6. Install the seat belt from the front seat track.
    7. • For the right front, refer to Seat Belt Retractor Replacement - Right Front in Seat Belts.
    • For the left front, refer to Seat Belt Retractor Replacement - Left Front in Seat Belts.
  7. Enable the SIR system if seat is equipped with air bag. Refer to Enabling the SIR System in Restraints.
  8. Inspect the front bucket seat for proper operation and adjustment.