GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Regal 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Heater Control Module Replacement

Removal Procedure
  1. Position the seat to the full-up position.
  2. Remove the front seat frame-to-floor bolts and rotate the seat forward to access the heater module.
  3. Remove the rosebud retaining module from the seat frame.

    4. Object Number: 651902 Size: SH
  4. Disconnect the electrical connector from the heater module.
  5. Remove the heater module from the front seat.

Installation Procedure
  1. Install the heater module to the front seat.

    2. Object Number: 651902 Size: SH
  2. Connect the electrical connectors to the heater module.
  3. Install the rosebud that attaches the module to the front seat frame.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the front bucket seat adjuster-to-floor pan bolts.

    5. Tighten
    Tighten the bolts to 42 N·m (31 lb ft).

  5. Reposition the front seat to the original position.