Removal Procedure
- Remove the front bumper fascia deflector. Refer to Front End Fascia Deflector Replacement in Bumpers.
- Disconnect the electrical connector from the front fog lamp bulb/socket.
- Rotate the front fog lamp bulb/socket counterclockwise to release.
- Remove the fog lamp bulb/socket from the front fog lamp assembly.
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
Installation Procedure
- Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated.
- Connect the electrical connector to the front fog lamp bulb/socket.
- Install the front bumper fascia deflector. Refer to Front End Fascia Deflector Replacement in Bumpers.
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
