GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2001 🢒 Regal 🢒 Bulletins 🢒 Info - Using Caution When Servicing Final Drive Unit on 4T65-E Transaxles to Insure Thrust Bearing (695) is Properly Seated/Located

Info - Using Caution When Servicing Final Drive Unit on 4T65-E Transaxles to Insure Thrust Bearing (695) is Properly Seated/Located

Subject:Using Caution When Servicing Final Drive Unit on 4T65-E Transaxles To Insure Internal Gear Thrust Bearing (695) is Properly Seated/Located

Models:2001-2005 GM Passenger Cars
with 4T65-E Transaxle (RPO's MN3, MN7, M15 or M76)



Object Number: 214412 Size: SH

When servicing a final drive unit on a 4T65-E transaxle, use extreme caution to ensure that the internal gear thrust bearing (695) is properly seated/located.

It has been found that after servicing a final drive unit on 4T65-E transaxles, the internal gear thrust bearing (695) was not properly seated/located causing internal damage and a repeat repair.

Use a generous amount of Transgel J 36850 when installing the internal gear thrust bearing (695) to the park gear (696) to ensure the internal thrust bearing (695) will retain its proper position during assembly.