Tools Required

J 41131 Engine Tilt Strap

1. Disconnect the intake air temperature (IAT) sensor electrical connector.
2. Remove the air inlet duct from the throttle body.
3. Apply the parking brake.
4. Put the transaxle in the Neutral position.
5. Remove the engine mount struts. Refer to Engine Mount Strut Replacement - Right Side and Engine Mount Strut Replacement - Left Side in Engine Mechanical - 3.8L.
6. Install the J 41131 to the left strut mount bracket and the upper radiator support.
7. Rotate the engine forward for component access.