Removal Procedure
- Remove the instrument
panel (IP) cluster (3). Refer to
Instrument Cluster Replacement
in Instrument Panel, Gages, and Console.
- Disconnect the electrical connector (2).
- Disengage the remote control door lock receiver retainers. Remove
the remote control door lock receiver (1).
Installation Procedure
- Install the remote control
door lock receiver (1). Make sure the retainers are fully seated.
- Connect the electrical connector (2).
- Install the IP cluster (3). Refer to
Instrument Cluster Replacement
in Instrument Panel,
Gages, and Console.
- Program the transmitter to the new receiver. Refer to
Transmitter Programming
.