Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the rear seat back. Refer to Rear Seat Back Replacement .
2. Remove the door weatherstrip from the pinch weld flange to expose the upper quarter trim panel.
3. Use J 38778 to disengage the push-in retainers and remove the trim panel.

1. Position the upper quarter trim panel into place.
2. Install the push-in retainers to secure the trim panel.
3. Install the door weatherstrip onto the pinch weld flange.
4. Install the rear seat back. Refer to Rear Seat Back Replacement .