GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2004 🢒 Regal 🢒 Suspension 🢒 Wheel Alignment 🢒 Rear Camber Adjustment

Removal Procedure

    Object Number: 156938 Size: SH
  1. Raise the vehicle and provide suitable support. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  3. Remove the strut from the vehicle. Refer to Strut Assembly Replacement .
  4. Place the strut in a vise and file the upper strut-to-knuckle hole lateral (oblong). Compare the appearance of the holes before filing (2) with after filing (3).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 156938 Size: SH
  1. Install the strut to the vehicle. Refer to Strut Assembly Replacement .

    2. Tighten
    Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.

  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  3. Adjust the camber (1).

    4. Tighten
    Tighten the strut-to-knuckle nuts to 120 N·m (89 lb ft).

  4. Lower the vehicle.