Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

1

Stabilizer Shaft Link Nut

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Load the rear suspension with the proper jack stand before tightening the nut to specifications.

Tighten
50 N·m(37 lb ft)

2

Stabilizer Shaft Link Bolt

Procedure

Load the rear suspension with the proper jack stand before tightening the bolt to specifications.

Tighten
50 N·m(37 lb ft)

3

Stabilizer Shaft Link