Preliminary Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Disconnect the stabilizer links from the stabilizer shaft. Refer to Stabilizer Shaft Link Replacement.

1

Stabilizer Shaft Insulator Fastener

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Install NEW bolts.

Tighten
22 N·m (16 lb ft) + 30 degrees

2

Stabilizer Shaft Bracket

Procedure

Replace one insulator at a time to ensure the right position and angle.

3

Stabilizer Shaft Insulator