Preliminary Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

1

Rear Axle Upper Control Arm Inner Fastener

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Torque on nut.

Tighten
150 N·m (111 lb ft)

2

Rear Axle Upper Control Arm Outer Fastener

Procedure

Torque on nut.

Tighten
115 N·m (X lb ft) +  90 degrees + 15 degrees

3

Rear Axle Upper Control Arm