Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove the rear spring. Refer to Rear Spring Replacement.

1

Rear Suspension Link Inner Bolt/Nut

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Install NEW bolt.
2. Torque on nut.

Tighten
90 N·m(66 lb ft) + 60 degrees

2

Rear Axle Lower Control Arm

Procedure

Check the rear alignment after installation. Refer to Wheel Alignment Measurement.