Preliminary Procedure

1. Remove the rear tire and wheel. Refer to Tire and Wheel Removal and Installation.
2. Remove and support the brake caliper with bracket as an assembly, without disconnecting the hydraulic brake hose from the caliper, and remove the rear brake rotor. Refer to Rear Brake Rotor Replacement.
3. Remove the rear axle upper control arm to knuckle bolt. Refer to Rear Axle Upper Control Arm Replacement.

1

Rear Wheel Hub Fastener (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
90 N·m (66 lb ft) + 75 degrees

2

Rear Wheel Bearing and Hub