Tire Pressure Indicator Receiver Replacement. Buick Regal 2009

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Regal 🢒 Suspension 🢒 Tire Pressure Monitoring 🢒 Tire Pressure Indicator Receiver Replacement

Callout	Component Name
Preliminary Procedure Remove the 2 center clips on the lower part of the rear bumper. Refer to Rear Bumper Fascia Extension Replacement.
1	Tire Pressure Indicator Receiver Fastener (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 4 N·m (35 lb in)
2	Tire Pressure Indicator Receiver Procedure Disconnect any electrical connectors as needed. After repairs, program the tire pressure monitoring system. Refer to Control Module References.

Callout

Component Name

Remove the 2 center clips on the lower part of the rear bumper. Refer to Rear Bumper Fascia Extension Replacement.

Tire Pressure Indicator Receiver Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
4 N·m (35 lb in)

Tire Pressure Indicator Receiver

Disconnect any electrical connectors as needed.
After repairs, program the tire pressure monitoring system. Refer to Control Module References.