Passenger Presence System Scan Tool Data Parameters
Parameter | Operating Conditions | Expected Value | Definition |
|---|---|---|---|
Operating Conditions: Ignition is ON, engine OFF, and vehicle is stationary. | |||
Battery Voltage | -- | Volts | This is the voltage input supplied to the passenger presence system. |
Passenger Presence Classification | -- | Empty | The scan tool displays Unknown, Empty, Child, Small Adult, or Large Adult. This is the state of what occupies the passenger seat, as monitored by the passenger presence system. |
Passenger Presence Detection | -- | Empty | The scan tool displays Unknown, Empty, or Occupied. This is the state of the passenger seat if it is occupied or empty as monitored by the passenger presence system. |
Passenger Presence Detection System Status | -- | No Fault | The scan tool displays No Fault, Plant Mode, Fault Mismatch, or Fault Barrier. This is the internal status of the operating mode of the passenger presence system. |
Passenger Seat Belt Status | -- | Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the seat belt switch in the seat belt buckle. |
Primary Key Status | -- | Valid | The scan tool displays Unknown, Valid or Invalid. This is the state of the primary key programmed in the passenger presence system module. |
Power Mode | -- | Accessory | The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch. |
