Driver Seat and Passenger Seat Heater Control Module Scan Tool Information. Buick Regal 2009

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Regal 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Driver Seat and Passenger Seat Heater Control Module Scan Tool Information

Table 1:	Heated Seat Module Scan Tool Data Parameters
Table 2:	Heated Seat Module Scan Tool Output Controls

Heated Seat Module Scan Tool Data Parameters

Parameter	System State	Expected Value	Description
Operating Conditions: Ignition ON
Left Front Seat Blower Duty Cycle	--	Varies	The scan tool displays 0 - 100 %. The value displayed is a PWM signal from the heated seat module to the logic terminal of the seat blower motor. Higher values indicate higher blower motor speeds while lower values indicate lower blower motor speeds.
Left Front Seat Cushion Heating Command	--	Inactive	The scan tool displays Inactive or Active. This parameter displays the commanded output from the heated seat module to the seat heater elements.
Left Front Seat Cushion Temperature Sensor	--	Varies	The scan tool displays 0 - 5 V. The voltage displayed is an input to the heated seat module from the seat cushion temperature sensor. Higher voltage readings indicate cooler seat temperatures while lower voltage readings indicate warmer seat temperatures.
Left Front Seat Heating/Venting/Cooling Mode	--	Off	The scan tool displays Off, Back & Cushion Heat, or Vent. This parameter indicates the heated or vented seat mode of operation.
Left Front Seat Heating/Venting/Cooling Level	--	Off	The scan tool displays Off, Low Medium, or High. When the heated seat is active, this parameter displays the selected temperature setting.
Right Front Seat Blower Duty Cycle	--	Varies	The scan tool displays 0 - 100 %. The value displayed is a PWM signal from the heated seat module to the logic terminal of the seat blower motor. Higher values indicate higher blower motor speeds while lower values indicate lower blower motor speeds.
Right Front Seat Cushion Heating Command	--	Inactive	The scan tool displays Inactive or Active. This parameter displays the commanded output from the heated seat module to the seat heater elements.
Right Front Seat Cushion Temperature Sensor	--	Varies	The scan tool displays 0 - 5 V. The voltage displayed is an input to the heated seat module from the seat cushion temperature sensor. Higher voltage readings indicate cooler seat temperatures while lower voltage readings indicate warmer seat temperatures.
Right Front Seat Heating/Venting/Cooling Mode	--	Off	The scan tool displays Off, Back & Cushion Heat, or Vent. This parameter indicates the heated or vented seat mode of operation.
Right Front Seat Heating/Venting/Cooling Level	--	Off	The scan tool displays Off, Low Medium, or High. When the heated seat is active, this parameter displays the selected temperature setting.

Heated Seat Module Scan Tool Output Controls

Output Control	Description
Left Front Seat Cushion Heating	This output control is used to command the left front seat heater elements On.
Left Front Seat Blower	This output control is used to command the left front seat blower motor On.
Right Front Seat Cushion Heating	This output control is used to command the right front seat heater elements On.
Right Front Seat Blower	This output control is used to command the right front seat blower motor On.