Preliminary Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement.

1

Wiring Harness Bracket

2

Wiring Harness Connectors

3

Fixing Points

4

Keyless Entry Control Module

Procedure

1. Release the wiring harness bracket.
2. Disconnect the wiring harness connectors.
3. Clip out the fixing points from the Keyless Entry Control Module.
4. Remove the Keyless Entry Control Module.
5. After repairs, for programming and set up information. Refer to Control Module References.