Exhaust Manifold Installation Right Side
- Install the exhaust manifold gasket.
- Install the exhaust manifold.
- Install the exhaust manifold nuts.
- Install the exhaust manifold lower heat shield.
- Install the exhaust manifold upper heat shield.
- Install the exhaust manifold heat shield bolts.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the exhaust manifold nuts to 16 N·m (12 lb ft).
Tighten
Tighten the exhaust manifold heat shield bolts to 10 N·m
(89 lb in).
Exhaust Manifold Installation Left Side
- Install the exhaust manifold gasket.
- Install the exhaust manifold.
- Install the exhaust manifold nuts.
- Install the exhaust manifold heat shield.
- Install the exhaust manifold heat shield bolts.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the exhaust manifold nuts to 16 N·m (12 lb ft).
Tighten
Tighten the exhaust manifold heat shield bolts to 10 N·m
(89 lb in).
