For 1990-2009 cars only
Circuit Description
This DTC identifies a malfunction within the EBCM.
Conditions for Running the DTC
The ABS/TCS conditions are normal.
Conditions for Setting the DTC
DTC C1255 is set when an internal EBCM malfunction exists.
Action Taken When the DTC Sets
| • | ABS/TCS is disabled. |
| • | ABS/TCS Indicators are turned on. |
| • | Tire Inflation Monitor (TIM) is disabled. |
| • | TIM Indicator is turned on when disabled. |
Conditions for Clearing the DTC
| • | Condition for DTC is no longer present and scan tool clear DTC function is used. |
| • | 100 ignition cycles have passed with no DTCs detected. |
Diagnostic Aids
| • | When DTC C1255 is displayed on the Scan Tool, it will be followed by two more numbers which should be noted along with any other DTCs that may be displayed. The additional two numbers displayed with DTC C1255 are for aiding engineering to determine the cause of the internal malfunction. |
| • | Make sure the integrity of the connection between the EBCM and the BPMV is clean, secure, tight, and free from corrosion. |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the ABS Diagnostic System Check? | -- | Go to Step 2 | |
2 | Inspect for poor connections/terminal tension at the EBCM harness connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 3 | |
3 | Replace the EBCM. Refer to Electronic Brake Control Module Replacement Did you complete the repair? | -- | -- |
