Important: The sunshade illuminated mirror lamps do not turn ON when the mirror cover is open.

Did you perform the Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

Inspect the filament of the sunshade illuminated mirror lamp bulb(s).

Are any bulb filaments open?

--

Go to Step 3

Go to Step 4

Replace the sunshade illuminated mirror lamp bulb(s).

Is the repair complete?

--

Go to Step 9

--

1. Remove the sunshade from the headliner. Refer to Sunshade Replacement .
2. Turn the ignition switch from LOCK to RUN.
3. Connect a test light between the sunshade illuminated mirror harness connector terminals 1 and ground.

Does the test light illuminate?

--

Go to Step 5

Go to Step 6

Connect a test light between the sunshade illuminated mirror harness connector terminals 1 and 2.

Does the test light illuminate?

--

Go to Step 7

Go to Step 8

Repair a poor connection in circuit 1732 between the sunshade illuminated mirror and S386.

Is the repair complete?

--

Go to Step 9

--

1. Inspect the sunshade illuminated mirror connector terminal for a poor connection.
2. If the connection is OK, replace the sunshade.

Is the repair complete?

--

Go to Step 9

--

Repair a poor connection or an open in circuit 850.

Is the repair complete?

--

Go to Step 9

--

1. Turn the ignition switch to LOCK.
2. Reconnect the connectors and reinstall the components that were removed.

Is the repair complete?

--

Go to Diagnostic System Check - Lighting Systems

--