Removal Procedure
- Remove the instrument
panel (IP) upper trim pad. Refer to
Instrument Panel Upper Trim Pad Replacement
in Instrument Panel, Gauges and Console.
- Rotate the ambient light sensor (1) counterclockwise to release
from the IP upper trim pad.
- Disconnect the electrical connector from the ambient light sensor.
Installation Procedure
- Connect the electrical
connector to the ambient light sensor.
- Install the ambient light sensor (1) to the IP upper trim pad,
then rotate clockwise to secure.
- Install the IP upper trim pad. Refer to
Instrument Panel Upper Trim Pad Replacement
in Instrument Panel,
Gauges and Console.