For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
- Disconnect the intake air temperature (IAT) sensor electrical connector.
- Disconnect the mass air flow (MAF) sensor electrical connector.
- Remove the air inlet duct from the MAF sensor and the throttle body.
- Remove the MAF sensor from the air filter housing.
Installation Procedure
- Carefully install the MAF sensor to the air filter housing.
- Install the MAF sensor (1) to the air inlet duct.
- Reconnect the electrical connector.
- Reconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
